Send Message
Contact Us
Krystal

Phone Number : +86-13065023255

WhatsApp : +8613065023255

Galvanized sheet classification code

July 2, 2022

(1) The classification and code of performance levels shall be in accordance with the provisions of Table 1.

Table 1 Performance classification and code

Level Performance Level Code Application scope

General Use 01

Mechanical bite 02 zinc layer weight code shall not exceed Z350

Stamping 03 thickness range ≥0.4mm zinc layer weight does not exceed Z275

Deep drawing 04

Special killed steel deep drawing 05

Unaged ultra-deep blanking 06

Structure 220, 250, 280, 320, 350, 400, 450, 550 thickness & LT; 0.4mm steel plates are not suitable for class 220, 250, 280 and 320

 

(2) The type and code of substrate shall be specified in Table 2.

Table 2 Types and codes of substrates

Type code of substrate

Cold rolled coil plate

Hot rolled pickling coil H

 

Galvanized sheet

 

(3) The classification and code of double-sided equal thickness galvanized layer and coating weight shall be in accordance with the provisions of Table 3. Steel plate and strip with coating weight not listed in Table 3 can also be provided by agreement of both parties.

Table 3 Classification and code of galvanized layer and coating weight

Galvanized layer zinc iron alloy coating

Plating weight /(g/㎡)(double-sided) code

(60) (Z60) (40) (ZF40)

80 (Z80) 60 (ZF60)

100 (Z100) 80 (ZF80)

120 (Z120) 100 (ZF100)

150 (Z150) 120 (ZF120)

180 (Z180) 150 (ZF150)

200 (Z200) 180 (ZF180)

220 (Z220)

250 (Z250)

275 (Z2750)

350 (Z350)

450 (Z450)

600 (Z600)

Note: the weight of zinc layer in brackets shall be negotiated by both parties

3.1 Differential thickness coating can be expressed as the weight of different coatings on the upper and lower surfaces, such as Z40/90 or ZF30/50, by half of the coating weight listed in Table 3. The surface appearance of low zinc layer weight may differ from that of high zinc layer weight.

 

(4) Classification and code name of zinc layer surface structure shall be specified in Table 4.

Due to strain test marketing, the polished steel plate and strip of grade 01~04 are leveled by an effective straightening machine before processing to avoid the occurrence of slip lines. Grade 05 or 06 polished steel plates and strips are unaged and can avoid slip lines for 6 months.

Table 4 Zinc layer surface structure and finishing surface classification and code

Surface structure code

Not just polished

Normal zinc flower N NS

Small zinc flower M MS

Zinc free flower F FS

Zinc ferroalloy ZF ZFS

 

(5) The classification and code of surface quality shall be in accordance with the provisions of Table 5.

Table 5 Surface quality classification and code

Surface quality code

Ordinary surface FA

Higher surface FB

Advanced surface FC

 

Galvanized sheet

(6) The classification and code of surface treatment shall be in accordance with the provisions of Table 6.

Table 6 Classification and code of surface treatment

Surface treatment symbol

Passivation C

Unction O

Paint sealant L

Phosphating P

Don't deal with U

6.1 passivation

The zinc coating can be passivated to reduce the rust (white rust) in the condition of wet storage and transportation. However, the corrosion resistance of this chemical treatment is limited and, moreover, hinders the adhesion of most coatings. This treatment is generally not in the zinc iron alloy coating, in addition to the finishing surface, as a general, the production plant on other types of galvanized layer are passivation treatment.

6.2 oil

Oiling can reduce the corrosion of steel plate under wet storage condition, and oiling the passivated steel plate and strip will further reduce the corrosion under wet storage condition. The oil layer should be able to be removed with a degreaser that does not damage the zinc layer.

6.3 paint sealant

An additional corrosion protection, especially fingerprint resistance, is provided by applying an extremely thin transparent organic coating film. Lubricity can be improved when forming, and as the adhesion bottom of the subsequent coating.

6.4 phosphating

Through phosphating treatment, the galvanized steel plate of various coating types can be coated without further treatment in addition to normal cleaning. This treatment can improve the adhesion and corrosion resistance of the coating and reduce the risk of corrosion during storage and transportation. After phosphating, it can be used with suitable lubricant to improve the molding performance.

6.5 does not handle

Plates and strips supplied in accordance with this standard may not be passivated or oiled or coated or coated or phosphating only if the orderer so requests and is responsible for such non-treatment.